Comments for Automotive Tools & Accessories

Comment on INNOVATE MOTORSPORTS 3769 LC-1 WIDEBAND CONTROLLER LAMBDA CABLE WITH O2 SENSOR by Jason

Jason — Thu, 23 Dec 2010 12:58:27 +0000

Awesome deal!!

Comment on 24 PIECE CRAFTSMAN SCREWDRIVER SET MADE IN USA WARRANTY FOREVER BY CRAFTSMAN! by Extended Car Warranty

Extended Car Warranty — Fri, 03 Dec 2010 12:35:01 +0000

Most people believe that extended warranties are only offered at their local dealerships and don’t realize that they can purchase better coverage at substantial savings directly from a warranty company. Local dealerships use extended warranties as “additional profit.” These warranties are typically restricted to being valid only at the location where the warranty was purchased. Warranties purchased through a local car dealership are typically financed in with the vehicle purchase. This traps the consumer into paying finance charges on their warranty purchase and eliminates the ability for them to cancel the warranty for a proper refund.

Comment on SOLAR PANEL VENTILATOR VENT FAN FOR HOUSE, HOME, ROOF, SHED, BOAT – MOUNTS ON ROOFING, FIBERGLASS, WOOD, METAL, GLASS ALMOST ANY TYPE OF SURFACE by Robart Thomas

Robart Thomas — Sat, 27 Nov 2010 18:43:04 +0000

Nice blog of Roof Insulation.
Excellent topics, I am searching online roofing. After long searching I got this online that, ROOFER.ORG is a “full service” National roof4.company and they can handle everything from a new roof installation, restoration and maintenance to re-roofs and repairs. All with the assurance that can solely come with years of experience. Every company is treated with the “personal touch” that comes from their staff. Contact today!

Comment on INNOVATE MOTORSPORTS 3793 DB BLUE WIDEBAND GAUGE ONLY 0-5 VOLT INPUT LINEAR (2 1/16 52MM) by Jason

Jason — Fri, 26 Nov 2010 12:59:27 +0000

The AEM UEGO is my favorite wideband by far, its one of the most accurate on the market and you cant beat the price, I got mine through http://www.aem-uego.com they offer free overnight shipping in the US

Comment on NEIKO PROFESSIONAL-GRADE 1/4″ DRIVE TORQUE SCREWDRIVER – 10-50 INCH LBS REVIEWS by Ralph Slaughter

Ralph Slaughter — Mon, 08 Nov 2010 23:05:15 +0000

Review by Ralph Slaughter for Neiko Professional-Grade 1/4" Drive Torque Screwdriver - 10-50 Inch Lbs Rating: I Received My Neiko Torque Screwdriver Yesterday And used It Right Away.It Worked Great,Is Well Made and A Great Deal For The Money.

Comment on NEIKO PROFESSIONAL-GRADE 1/4″ DRIVE TORQUE SCREWDRIVER – 10-50 INCH LBS REVIEWS by A. Weintraub

A. Weintraub — Mon, 08 Nov 2010 23:03:22 +0000

Review by A. Weintraub for Neiko Professional-Grade 1/4″ Drive Torque Screwdriver – 10-50 Inch Lbs
Rating:
Professional-Grade Torque Screwdriver – 10-50 Inch Lbs

I checked the torque screwdriver’s accuracy in the range 25-45 in-lb by comparing it to a standard torque wrench using adapter sockets, and it is good. Both the torque wrench and the torque screwdriver release at the same point, and the screwdriver’s red-on-white hairline indicator is easy to read. Suggest zeroing the indicator when storing the unit.

Comment on NEIKO PROFESSIONAL-GRADE 1/4″ DRIVE TORQUE SCREWDRIVER – 10-50 INCH LBS REVIEWS by Nukedude

Nukedude — Mon, 08 Nov 2010 22:34:44 +0000

Review by Nukedude for Neiko Professional-Grade 1/4" Drive Torque Screwdriver - 10-50 Inch Lbs Rating: Great torque screwdriver for use around the house.Unit was well packaged, came with many bits and did what it was supposed to. Mine only has a red hairline indicator so there may be some variances on models. Checked with a toque calibrator and it is accurate. I bought this for use with Alumiconn electrical connectors where I needed 10-15 inch pounds or torque. Works great and has a fitted case for everything. Recommend for small projects. Gave it a 4 star due to the cheap type of bits included. The bits are the same ones included with every other multi-bit screwdriver out there. On a good not if you loose one, it is easy to replace.

Comment on NEIKO PROFESSIONAL-GRADE 1/4″ DRIVE TORQUE SCREWDRIVER – 10-50 INCH LBS REVIEWS by B. Waggoner

B. Waggoner — Mon, 08 Nov 2010 22:25:16 +0000

Review by B. Waggoner for Neiko Professional-Grade 1/4″ Drive Torque Screwdriver – 10-50 Inch Lbs
Rating:
A well built and well packaged product for occasional use. Necessary for tightening electrical connections to the proper torque (when circuit power is turned off!). Torque can be adjusted to 10-50 inch-pounds with about 1 inch-pound resolution. That said, there are two separate torque indicator lines within the sight window, spaced about 5 inch-pounds apart, with no explanation as to which is the correct one. Screwdriver “clicks” when you reach the desired torque. Accessory bits are Torx T-10 through T-40 (6 total), plus 3mm to 6mm hex (4 total), plus 3mm and 6mm slotted, plus 2 each of Philips #0 through #3. Magnetic tip accepts any standard 1/4″ hex bit. Would be perfect if I knew which of the two torque indicator lines was the correct one.

Comment on NEIKO PROFESSIONAL-GRADE 1/4″ DRIVE TORQUE SCREWDRIVER – 10-50 INCH LBS REVIEWS by Christen C. Lofland

Christen C. Lofland — Mon, 08 Nov 2010 21:28:58 +0000

Review by Christen C. Lofland for Neiko Professional-Grade 1/4" Drive Torque Screwdriver - 10-50 Inch Lbs Rating: I bought this in order to properly install AlumiConn aluminum to copper connectors in my house. The instructions say to use a torque screwdriver. These tend to be VERY expensive, but I found this "NEIKO" model for a good price here. I was a bit worried it would be so cheap that it would not work, but it works great! It is sturdy, has a nice set of tips and a great box. I've used it for a year now and it has held up fine to the simple work I do with it.

If you need a nice torque screwdriver for basic home use grab this one. You won't be sorry.

Comment on HI-LIFT JACK 4X400 4XRAC JACK MOUNTING SYSTEM by Carlos Cortes Gomez

Carlos Cortes Gomez — Mon, 08 Nov 2010 12:06:18 +0000

Review by Carlos Cortes Gomez for Hi-Lift Jack 4X400 4XRAC Jack Mounting System Rating: I mounted my Hi-Lift in a roof basket by adapting this kit on some metal plates. Works fine and gives nice support to the Hi-Lift. I think you won't regret it if you get one of this.